Affiliate links are not active. Buttons are ordinary links to the merchant, and we earn nothing from them.
Disclosure: We have applied to affiliate programs and may earn commissions from these links in the future. Right now the links are ordinary links, and we earn nothing from them. How we make money

Updated 2026-11-20 · Specs and prices from the merchant's US store · Not a hands-on review

Which home backup power station is the right size?

Pick the devices you need to keep running during an outage. We estimate the runtime on three BLUETTI power stations and show which ones can handle the load.

1. What do you need to keep running?

Total load: 0 W

These wattages are rough typical figures, not measurements. Check the label on your own device. Fridges and freezers cycle on and off, so their average draw is usually lower than the running figure we use, and real runtime is often longer. Motors and compressors briefly draw several times their running watts when they start. A CPAP with a heated humidifier uses much more power.

2. Estimated runtime on each model

These are estimates, not guarantees. We count 70% of rated capacity as usable. That matches BLUETTI's own example for the Elite 100 V2 (a 40 W fan running about 18 hours on 1,024 Wh) and allows for inverter losses and battery reserve.

Best value per watt-hour

BLUETTI Elite 300

$1,099.00$1,199.00
Capacity
3,014 Wh
Rated AC output
2,400 W
Price per kWh
$365 (lowest)
Estimated runtime: –

Good for: A refrigerator plus essentials for most of a day
Not for: Whole-home or 240V appliances

View on BLUETTI's site →

Ordinary link: no affiliate commission

Price checked 2026-11-20. Spec source

Most capacity

BLUETTI Elite 400

$1,499.00
Capacity
3,840 Wh
Rated AC output
2,600 W
Price per kWh
$390
Estimated runtime: –

Good for: Longer outages and higher loads, such as a fridge, freezer and work-from-home setup
Not for: Buyers who need to move it around often (check the listed weight on BLUETTI)

View on BLUETTI's site →

Ordinary link: no affiliate commission

Price checked 2026-11-20. Spec source

Budget: essentials only

BLUETTI Elite 100 V2

$449.99$499.00
Capacity
1,024 Wh
Rated AC output
1,800 W
Price per kWh
$439
Estimated runtime: –

Good for: Router, phones, lights, CPAP and laptop through a short outage
Not for: Running a refrigerator for more than a few hours

View on BLUETTI's site →

Ordinary link: no affiliate commission

Price checked 2026-11-20. Spec source

Side-by-side specs

ModelCapacityRated outputPrice$/kWhEst. hours at 150 W*
BLUETTI Elite 3003,014 Wh2,400 W$1,099.00$365~14 hView (no commission)
BLUETTI Elite 4003,840 Wh2,600 W$1,499.00$390~18 hView (no commission)
BLUETTI Elite 100 V21,024 Wh1,800 W$449.99$439~5 hView (no commission)

*Estimate for a constant 150 W load (e.g. a fridge compressor running non-stop) at 70% usable capacity. Most fridges cycle, so real runtime is often longer. Capacity and output from each product page on BLUETTI's US store. Prices from BLUETTI's US store. All checked 2026-11-20. Prices and sales change often, so confirm the price on BLUETTI before you buy.

Safety

If you rely on powered medical equipment such as a CPAP or oxygen concentrator, ask your equipment supplier or doctor about backup power. Don't rely only on these estimates. Follow BLUETTI's safety instructions. Never connect a power station to your home's wiring without a proper transfer switch installed by a licensed electrician.

Questions

How is runtime estimated?

Estimated runtime = capacity (Wh) × 70% ÷ the total watts you selected. The 70% is our conservative assumption, based on BLUETTI's own runtime example. Real runtime depends on temperature, battery age, how often appliances cycle, and the settings you use. Treat these numbers as rough estimates, not guarantees.

What does 'Load too high' mean?

The total you selected is above the unit's rated AC output, so it would likely shut off or refuse to run that combination. Some units have special modes for heating appliances. We don't count those, because they don't work for every device.

Can these run my whole house?

No. These are plug-in power stations. Connecting one to a home circuit requires a transfer switch or BLUETTI's home integration kit, installed by a licensed electrician.

Why only BLUETTI on this page?

This first version covers one brand so every spec and price can be checked directly against the merchant's US store. We plan to add more brands once their data can be checked the same way.

Have you tested these units?

No. This page compares the published specifications and current prices, and does the runtime math for you. It is not a hands-on review.